Family-owned · Offices in Fort Worth & Saginaw · We take calls 24/7 (682) 474-0599 office@servicechampstx.com

Water Heater Repair in Fort Worth & North Tarrant County

No hot water, not enough of it, a puddle under the tank or a relief valve that won’t stop dripping. Our plumber finds the cause, shows it to you, and prices the repair before touching it.

Request a Plumber

Tell us what's going on and the office will call you back to set a time.

Or call us directly at (682) 474-0599

Rather pick a time yourself? Book online

Water heater repair

What can be repaired on a tank water heater?

Nearly everything except the tank itself. On a gas heater that means the pilot assembly, thermocouple, gas control valve and venting; on an electric one, usually two heating elements and their thermostats. Relief valves, drain valves and supply connections can be swapped too. Once the tank is leaking, though, the answer is a new water heater.

  • No hot water from a gas or electric tank
  • Hot water that runs out fast
  • Pilot, thermocouple and gas control valve problems
  • Electric elements and thermostats
  • Dripping temperature and pressure relief valves
  • Leaking drain valves and supply connections
  • Popping or rumbling from sediment
  • Rusty or discolored hot water
New A. O. Smith tank water heater installed in a garage with new supply lines
Fort Worth & Saginaw officesTarrant County and nearby

Good to know

Why is my water heater popping or rumbling?

Usually sediment. Fort Worth’s 2025 water quality report lists total hardness of 108 to 150 parts per million, about 6 to 9 grains per gallon. As the tank heats, those minerals settle on the bottom, and water trapped under the layer pops as it boils. Flushing helps early; a crusted tank may need more.

If your water heater is acting up

  1. If the tank is leaking, close the cold-water valve on top of the heater.
  2. Turn a gas heater’s control knob to off or pilot, or switch off an electric heater’s breaker.
  3. Move boxes and anything that soaks up water away from the base of the tank.
  4. Photograph the rating plate on the side so we know the brand, model and serial number.
  5. Call (682) 474-0599 and tell us gas or electric, and what you’re seeing.
A Service Champs pickup with a ladder rack parked in a driveway beside a white work van
Smiling Service Champs technician sitting on the back of a stocked service truck holding a tablet
Service Champs Heating & Air pickup with Call Today lettering parked in front of two-story homes
A smiling customer and a Service Champs technician taking a selfie next to the company truck

The rules

What does the plumbing code say about the relief valve?

Every storage water heater needs one, and its pipe has rules. The 2021 International Plumbing Code, which Fort Worth has adopted with amendments, calls for a self-closing temperature and pressure relief valve. Its discharge pipe has to run full size, by gravity, with no valve or trap, and end where someone will notice water coming out.

6 in.the highest a relief valve’s discharge pipe may end above the floor, under IPC 504.6

Sections 504.4 and 504.6 are in chapter 5 of the 2021 International Plumbing Code, and the city lists its adopted codes on its Building & Energy Codes page. Section 504.4 adds that the relief valve shall not be used to control thermal expansion. So a valve that drips each time the burner fires is a sign of pressure building in the house, a job for an expansion tank, covered on our water heater installation page.

Watch

What does water heater maintenance look like?

Eric’s team posted this 10-second reel on water heater maintenance to Facebook and Instagram. It’s a reminder that a tank needs some care between breakdowns, especially on hard water. Typical upkeep means draining sediment, checking that the relief valve opens and reseats, and looking over the burner or elements. Ask about it when we’re out for a repair.

Water heater maintenance · Instagram · Facebook

How the visit runs

How a water heater repair visit runs

  1. Call or bookCalls are answered 24/7, and online booking runs through Housecall Pro.
  2. Find the causeThe plumber checks the burner or elements, the valves and the venting, and traces any water.
  3. Show and priceYou see photos of the problem and get the repair price, or a replacement price if the tank failed.
  4. Fix itParts are replaced and the heater is brought back up to temperature and checked for leaks.
  5. Last lookThe relief valve pipe and the floor around the tank get a final check before the plumber leaves.

From a customer

What do customers say about our plumbing repairs?

Calvin L. wrote “Gary Anderson is the consummate professional,” adding that “he thoroughly explains recommended maintenance.” Gairik C. thanked Gary and Ashley, who “Promptly addressed root cause of the issue and explained how to avoid.” Finding the cause, and not just the symptom, is how a water heater repair should go.

“Gary is so knowledgeable and cost efficient. He saved me money on future problems as well as fixing my current issues!”
Chris S.Google review, Service Champs Plumbing

FAQ

Hot Water Trouble: Questions We Answer Often

Find the source before assuming the worst. It may be the relief valve discharging, a loose supply connection, a drain valve that won’t seal, or condensation dripping off a gas burner on a cold morning, and all of those can be repaired. Water seeping from the tank body or its bottom seam means the tank itself has failed and needs replacing.

120°F for most homes. The U.S. Consumer Product Safety Commission urges that setting to prevent scalds, and notes most adults will suffer third-degree burns from 150-degree water in two seconds. Check it with a kitchen thermometer at a tap first thing in the morning, before anyone showers, and adjust the dial from there.

Often one of its two heating elements has quit. Most electric water heaters have two, each with its own thermostat, and CPSC notes both have to be set to a common temperature to work properly. A dead lower element leaves only the top of the tank heating, so the hot water is gone after one shower. Heavy sediment can cause the same symptom.

Common causes are a worn thermocouple, a dirty pilot, a draft at the burner, or a safety sensor that has tripped. Relight it only by the steps on the heater’s label, and don’t keep trying if it won’t stay lit. If you smell gas at any point, leave the house and call the gas utility from outside, then call us.

Follow the schedule in the owner’s manual, and don’t skip it here. Fort Worth’s water carries enough calcium to leave sediment in a tank year after year, and a thick layer is harder to clear. If a tank has gone several years without a flush, the plumber may test the drain valve first, since old ones can stick open once used.

Service area

Which towns does our water heater repair reach?

Water heater repairs are dispatched from Golden Heights Rd in far north Fort Worth, the same office our heating and cooling techs work from. That puts Keller, Haslet, Watauga, North Richland Hills and Haltom City close by, with Arlington, Mansfield, Benbrook and Granbury farther out. Saginaw, Blue Mound and Lake Worth sit near our W Lemon St office.

Talk to Eric's team

No hot water this morning?

Tell us at (682) 474-0599 whether it’s gas or electric and what you’re seeing. The plumber will show you the cause and the price before the repair.

Call now Book Online