Furnace Installation Sized for Your Fort Worth Home
When repairs stop making sense, a new gas furnace goes in sized for the house. You get the options and prices up front, and financing through three partners if you want it.
Request Service
Tell us what's going on and the office will call you back to set a time.
Rather pick a time yourself? Book online
Furnace installation
When is it time to replace a furnace instead of repairing it?
When the repairs keep coming or the main part is gone. A cracked heat exchanger, repeated control or blower failures on an older furnace, or a system that can’t keep the house warm all point toward replacement. The tech prices the repair next to a new furnace so you can compare them, and the choice stays yours.
- Furnace replacement when repair no longer pays
- Attic furnace change-outs
- Complete heating and cooling system replacement
- Sizing the furnace to the house
- New thermostat with the install
- Old unit removal
- New Goodman furnaces, like the one in our photos
- Financing through three partners
Good to know
What size furnace does my house need?
One sized for the house itself, not copied from the old furnace’s label. Square footage is only the start; insulation, windows, duct condition and how much sun the house takes all move the number. An oversized furnace heats in short bursts, which is hard on parts, while an undersized one runs and runs on cold nights.
Thinking about a new furnace?
- Find the model sticker on the old furnace and take a photo. It tells the tech the unit’s age and size.
- List the rooms that run cold and any repairs from the last couple of winters.
- Decide what matters most to you: the upfront price, lower gas bills, or quieter running.
- Read about the three partners on our financing page before the visit, not at checkout.
- Call (682) 474-0599 to set up a visit, and ask for repair and replacement prices side by side.
The rules
Does replacing a furnace in Fort Worth need a permit?
Yes. The City of Fort Worth’s residential permitting page says changing, moving or repairing mechanical equipment such as a central heating and air conditioning system requires a mechanical permit. The city also requires contractors who register for mechanical permits to hold a valid Texas air conditioning and refrigeration license with the proper endorsements.
Mechanical permitwhat Fort Worth requires to change out central heating and air
Both requirements are on the city’s residential permitting page and its contractor registration page, which exempts owners doing work on their own homestead. Towns outside Fort Worth run their own permit offices, so ask your city before the install date. Service Champs works under Eric Villarreal’s Texas A/C contractor license, TACLB53983E, which you can look up on the TDLR license search.
How the visit runs
From quote to first heat
- Home visitBook by phone or online, and a tech or Eric comes to look at the house and the old unit.
- Options in writingChoices and prices for the new furnace, with no pressure to buy the biggest one.
- Install dayReminder and arrival texts, then the crew takes out the old furnace and sets the new one.
- Start-up checkThe new furnace is fired and run through a full heat cycle, and the thermostat is set.
- Clean finishThe work area is cleaned up, and the Protection Club is offered to keep it tuned.
From a customer
What do customers say about new system installs?
Margie F. praised “the promptness and attention to details in our interactions with Eric and his installation crew,” adding that “Everything was completed and they cleaned up afterwards.” Jay M. wrote that before his install, Eric “inspected my home to make sure I was getting the unit I needed and wanted.”
“OMG Ezekiel is so professional. He was able to guide me all the way through my heating system. That was a good experience with him.”
FAQ
New Furnace Questions
Should I replace the AC at the same time as the furnace?
It’s worth pricing both if the outdoor unit is about the same age. The furnace’s blower pushes the cooled air in summer, and the indoor coil sits on the furnace, so the two work as one system. Replacing them together often makes sense, but if the AC is newer, a furnace-only swap is a fair choice. Ask for both prices.
Which furnace brands can you put in?
Our own job photos show a new Goodman furnace installed in an attic, and the crew services every major brand, Trane, Carrier, Rheem and York included. Ask the tech which models fit your house and budget. You’ll get more than one priced, so you can compare features and cost on paper instead of guessing.
Is financing available for a furnace replacement?
Yes. Service Champs works with three financing partners: Credit Hub by Watercress Financial for home-improvement loans with a soft credit check, Chowder Financial for lease-to-own, and MicroF RTO for rent-to-own with no credit check. Approval and terms come from each partner, so sort it out before install day. Details are on the financing page.
Is a high-efficiency furnace worth it in Fort Worth?
It depends on how long you’ll stay and how much heat the house uses. Winters here are shorter than up north, so a high-efficiency furnace takes longer to pay for itself, but hard freezes still come. It also needs a condensate drain, which matters when the furnace lives in the attic. The tech will price both so you can weigh them.
Will a new furnace fix rooms that never get warm?
Not always on its own. Cold rooms are often a duct problem: a crushed or disconnected run in the attic, a leaky joint, or a room that never had enough supply air. The tech looks at the ductwork during the visit, and duct repair can be done along with the new furnace when it’s needed.
Service area
Where do you install furnaces?
Wherever our two offices reach. Starting from Golden Heights Rd near the Golden Triangle, the crew installs in Fort Worth, Keller, North Richland Hills, Arlington, Mansfield, Burleson and Granbury. Starting from W Lemon St, it works in Saginaw, Blue Mound, Lake Worth, Sansom Park, Azle and Rhome. Our service areas page lists the rest.
- Fort Worth, TX
- Keller, TX
- Arlington, TX
- Saginaw, TX
- Blue Mound, TX
- Lake Worth, TX
- Sansom Park, TX
- Azle, TX
- Springtown, TX
- Reno, TX
- Rhome, TX
- Haslet, TX
- Roanoke, TX
- Watauga, TX
- North Richland Hills, TX
- Haltom City, TX
- Southlake, TX
- Hurst, TX
- Euless, TX
- Bedford, TX
- Grapevine, TX
- Mansfield, TX
- Burleson, TX
- Benbrook, TX
- Granbury, TX
- Weatherford, TX
- Crowley, TX
- Everman, TX
- Rendon, TX
- Joshua, TX
- Godley, TX
- Alvarado, TX
- Keene, TX
- Venus, TX
- All service areas
Related services
Also worth a look before you replace
Talk to Eric's team
Ready to compare repair and replacement?
Set up a visit at (682) 474-0599 or through online booking. You’ll have the options and prices in hand before you decide anything.


