Heating Repair and Service in Fort Worth & Tarrant County
Gas furnaces, heat pumps and dual-fuel systems of every brand, looked after by a family-owned crew that takes calls 24/7. You see what the tech found, and what it costs, before any work starts.
Request Service
Tell us what's going on and the office will call you back to set a time.
Rather pick a time yourself? Book online
Heating
Which heating systems does Service Champs work on?
Gas furnaces, electric heat pumps and the dual-fuel systems that pair the two, from any manufacturer. In a typical Fort Worth home the same ducts carry summer cooling and winter heat, so one crew handles both. Our techs repair, tune up and replace all three, along with the thermostats that run them, and Eric still works jobs himself.
- No heat, or cold air from the vents
- Furnaces that light, then shut off
- Heat pumps iced over or stuck in defrost
- Dual-fuel systems that won’t switch over
- Blower motors and control boards
- Thermostat and wiring faults
- Fall tune-ups with a carbon monoxide test
- Furnace and heat pump replacement
Heating Repair & Installation
Furnace, heat pump or tune-up?
Start with the equipment in your home. A gas furnace has burners and a vent pipe and often sits in the attic, a hall closet or the garage; if it won’t light or blows cold air, go to furnace repair. If the outdoor unit runs all winter and the thermostat has an emergency heat setting, you have a heat pump, covered under heat pump repair. Working fine? A tune-up keeps it that way. Ready to replace? Compare new furnaces and heat pump installs.

Furnace Repair
Gas furnaces that won't light, short-cycle or blow cold air.

Heat Pump Repair
Heat pumps stuck in defrost, iced over or blowing lukewarm air.

Heating Tune-Ups
21-point furnace and heat pump tune-ups with a carbon monoxide test.

Furnace Installation
New gas furnaces sized for the house and its ductwork.

Heat Pump Installation
New heat pumps and dual-fuel systems for heating and cooling.
Good to know
Can I get heating help at night or on a weekend?
Yes, we take calls 24/7, and that includes Saturdays, Sundays and holidays. The first hard cold front of the year tends to bring a rush of no-heat calls, so the sooner you reach us, the sooner you’re on the schedule. Protection Club members get priority dispatch and pay no overtime charges on evenings and weekends.
No heat right now? Check these first
- Make sure the thermostat says Heat, the setting is a few degrees above the room, and the batteries aren’t dead.
- Pull the air filter. One caked with gray dust can make a furnace overheat and shut itself off.
- Find the furnace’s power switch, which looks like a light switch near the unit, and check the breaker panel too.
- On a heat pump, light frost on the outdoor coil is normal in cold weather. A thick block of ice that stays put is not.
- Still cold? Call (682) 474-0599. We take calls 24/7 and walk you through what we find.
The rules
How cold do Fort Worth winters get, according to the weather service?
Cold enough to test any heating system. NWS Fort Worth records show DFW Airport fell to -2°F on February 16, 2021, and stayed at or below freezing for 139 straight hours that week. In a typical year, DFW’s first freeze arrives around November 22 and the last one around March 12, leaving furnaces and heat pumps months of work.
-2°FDFW Airport’s low on February 16, 2021, per NWS Fort Worth
The figures are on the weather service’s February 2021 winter storm page and its DFW freeze summary. Ordinary winters are gentler, yet DFW still logged 30 freezing nights in 2024-25 and 19 last winter. A system set up for a typical January also has to ride out the odd week like 2021. Texas requires whoever works on it to hold a TDLR license; Eric Villarreal’s, TACLB53983E, is on the TDLR license search.
How the visit runs
How a heating repair visit goes
- Book itCall {phone} at any hour, or pick a time online through Housecall Pro.
- Know who's comingYou get reminders before the day and a heads-up text once the tech leaves.
- See the problemThe tech tests the system and shows you photos or video of what failed.
- Pick a fixOptions and their prices come first, and nobody pushes an upgrade.
- Warm againThe repair is done, the area is tidied, and the Protection Club is there if you want it.
From a customer
What do customers say about their heating calls?
Lea Ann K. wrote that James “was very detailed with his description and photos with suggested repairs” and “wrote up a quote for replacement and/or repairs to get it working again.” Ivette B. got “a solution that worked within our budget,” and Megan S. calls the company “our go-to for any heating and AC needs.”
“OMG Ezekiel is so professional. He was able to guide me all the way through my heating system. That was a good experience with him.”
FAQ
Heating Questions We Hear Every Winter
Why does the heat seem to quit on the first cold night of the year?
Because it’s the first time in months the burners have had to light or the heat pump has had to run in reverse. Dust settles on flame sensors over the summer, igniters crack, and a part that was already worn finally gives out. A tune-up in October or early November, before the first cold front, catches most of these while the weather is still mild.
Could the thermostat be the real problem?
Sometimes. Dead batteries, a setting left on Cool, or a loose wire behind the thermostat can look exactly like a furnace or heat pump failure. The tech checks whether the thermostat is calling for heat before opening up the equipment. If the thermostat turns out to be the culprit, repairing or replacing it is part of the same heating service.
My furnace is up in the attic. Does that change the visit?
It changes where the tech spends time. Plenty of Fort Worth homes have the furnace or air handler on an attic platform, where summer heat bakes the wiring and a hard freeze can stop up a condensate line. The tech checks the unit, the drain line and the duct connections up there, then shows you photos so you don’t have to climb the ladder.
Do you work on every brand of furnace and heat pump?
Yes, all makes and models. That includes Trane, Carrier, Goodman, Rheem and York, along with older units whose brand plate has faded off the cabinet. Parts differ from brand to brand, so the tech identifies the exact model before quoting a repair. The Protection Club also covers every brand and system type.
Will the tech tell me if replacing makes more sense than repairing?
Yes, and the decision stays with you. When a system is old or the repair is a big one, the tech prices the fix and lays it next to what a replacement would involve, with photos of the worn parts. Some homeowners repair and plan ahead; others replace now. Financing through three partners is there if you need it.
Service area
Which towns does the heating crew cover?
Heating calls run out of two offices. Golden Heights Rd, in far north Fort Worth, sends techs to Fort Worth, Haslet, Keller, Watauga, North Richland Hills and Hurst, and south to Burleson and Mansfield. Old-town Saginaw’s W Lemon St office takes Saginaw, Blue Mound, Lake Worth, Azle and Rhome. Other towns are on the service areas page.
- Fort Worth, TX
- Saginaw, TX
- Haslet, TX
- Keller, TX
- Blue Mound, TX
- Lake Worth, TX
- Sansom Park, TX
- Azle, TX
- Springtown, TX
- Reno, TX
- Rhome, TX
- Roanoke, TX
- Watauga, TX
- North Richland Hills, TX
- Haltom City, TX
- Southlake, TX
- Hurst, TX
- Euless, TX
- Bedford, TX
- Grapevine, TX
- Arlington, TX
- Mansfield, TX
- Burleson, TX
- Benbrook, TX
- Granbury, TX
- Weatherford, TX
- Crowley, TX
- Everman, TX
- Rendon, TX
- Joshua, TX
- Godley, TX
- Alvarado, TX
- Keene, TX
- Venus, TX
- All service areas
Related services
Other work on the same system
Talk to Eric's team
Cold house? Let's get the heat back on.
Phone (682) 474-0599 or grab a time online. We take calls 24/7, and you’ll know what’s wrong and what it costs before a repair begins.


