Family-owned · Offices in Fort Worth & Saginaw · We take calls 24/7 (682) 474-0599 office@servicechampstx.com

Water Heater Replacement and Installation in Fort Worth

When the tank leaks or can’t keep up, we size a new gas or electric water heater to your household, install it to today’s plumbing code, and go over the options and price with you first.

Request a Plumber

Tell us what's going on and the office will call you back to set a time.

Or call us directly at (682) 474-0599

Rather pick a time yourself? Book online

Water heater replacement

How do you pick the right size water heater?

By your busiest hour, not just the gallons on the old tank. Count the showers, laundry and dishwasher runs that happen back to back on a weekday morning, then compare a tank’s first-hour rating, the hot water it can deliver in an hour starting full. If you keep running out, the old size was too small.

  • Gas and electric tank water heaters
  • Like-for-like swaps for a failed tank
  • A bigger tank when the family keeps running out
  • Relief valve discharge piped to code
  • Thermal expansion tanks
  • Drain pans where a leak would do damage
  • New supply connections and shutoff valve
  • Garage and utility-closet installs
New A. O. Smith tank water heater installed in a garage with new supply lines
Fort Worth & Saginaw officesTarrant County and nearby

Good to know

How do I know it's time to replace the water heater?

When the tank itself leaks, it’s time. Rusty hot water, a tank that runs out sooner every month even after flushing, or repairs stacking up on an old unit point the same way. The plumber reads the date code on the rating plate, looks at the tank’s condition, and gives you repair and replacement prices side by side.

Before the new tank goes in

  1. Clear a path from the door to the water heater and a few feet of room around it.
  2. Photograph the old heater’s rating plate: brand, model, gallons and serial number.
  3. Count the showers, laundry loads and dishwasher runs on your busiest morning.
  4. Decide whether you’d like to stay with the same fuel, gas or electric, before the estimate.
  5. Call (682) 474-0599 or book online, and we’ll set up the replacement visit.
Service Champs pickup parked in front of a customer's brick two-story home
Two Service Champs Heating & Air pickups parked on a residential street with brick homes behind them
Two wrapped Service Champs pickups parked one behind the other along a tree-lined residential street
Entrance to the Service Champs office, a glass door with office and service hours under a small metal awning

The rules

What does Fort Worth require when a water heater is replaced?

A plumbing permit, for one. The city’s residential permitting page lists water heaters among the plumbing work that needs it. The 2021 International Plumbing Code the city has adopted also calls for a thermal expansion tank when the cold supply passes through a check valve, pressure reducing valve or backflow preventer.

80 psithe static pressure cap in IPC 604.8 that an expansion tank is sized to stay under

The expansion rule is Section 607.3 of the 2021 International Plumbing Code. Heated water expands, and when a check valve or pressure reducing valve keeps it from pushing back toward the city main, house pressure climbs until the relief valve or a weak fitting gives. The expansion tank goes on the cold supply downstream of those valves, sized to the maker’s instructions so pressure stays within Section 604.8. Permit details are on Fort Worth’s Residential Permitting page; homes outside city limits follow their own city’s permit office.

Watch

Running out of hot water halfway through a shower?

Eric’s team made this short reel for homes where the hot water gives out before the last person gets a shower. Often the tank is too small for the household now, or sediment has taken up room at the bottom. Watch it, then call, and we’ll size the replacement to the way your family actually uses hot water.

Still running out of hot water? · Instagram · Facebook

How the visit runs

How a water heater replacement runs

  1. Size itThe plumber looks at the old heater, the space, and how your household uses hot water.
  2. Options and priceYou get the choices, fuel and the tank sizes that fit, with prices before anything is removed.
  3. Out with the oldWater and fuel are shut off, and the old tank is drained and disconnected.
  4. Install to codeThe new heater goes in with relief valve piping, a pan and an expansion tank where the code calls for them.
  5. Fill and testThe tank is filled, purged of air, lit or powered, and checked for leaks before the plumber leaves.

From a customer

What do customers say about their new water heaters?

Ricky M. wrote “Gary came out and did our hot water heater replacement. Did a great job.” Ricky also called Gary “Friendly and Professional” on that visit. Ronald M., who picked us for a new water heater too, said the team was “very accommodating during the bid process.” A clear bid comes first, then the install.

“Gary came out and did our hot water heater replacement. Did a great job. Friendly and Professional also price Friendly.”
Ricky M.Google review, Fort Worth office

FAQ

Before You Replace a Water Heater: Common Questions

Sometimes, but most replacements stay with the same fuel, since the house is already set up for it: a gas valve and flue for gas, a 240-volt circuit for electric. Switching means changes beyond the plumbing, so bring it up at the estimate. The plumber will tell you what the change involves before you decide.

Because of where a leak would go. Section 504.7 of the plumbing code calls for a pan wherever leakage from the tank would cause damage, which describes a closet next to carpet more than a concrete garage floor. The pan has to be metal or an approved material, and a plastic pan can’t go under a gas-fired heater.

It’s safer to size the tank right. The CPSC warns that water at 140 degrees can cause third-degree burns in six seconds, and at 130 degrees in thirty, compared with five minutes at 120. If the household needs more hot water than a 120°F setting gives, a larger tank or a higher first-hour rating is the better fix.

Usually, but measure before you choose. Some newer models are wider or taller than the tank they replace, and a utility closet or a garage corner may be tight once the pan, relief piping and expansion tank go in. The plumber measures the space and the doorway at the estimate, so the model you pick fits through both.

Not always. If a tank that used to keep up now runs out, sediment or a failed element may be stealing capacity, and a repair can fix that. If the household grew, or a big soaking tub went in, a larger tank or one with a higher first-hour rating makes sense. The plumber checks the old unit before recommending a size.

Service area

Which towns get water heater installs from us?

New water heaters go in across Tarrant County and next door. Our Fort Worth office on Golden Heights Rd, in the Golden Triangle Business Park area, handles north Fort Worth’s 76137 and 76244 ZIP codes, Hurst, Burleson and Weatherford. The Saginaw office on W Lemon St is closer for Saginaw, Rhome, Sansom Park and Roanoke.

Talk to Eric's team

Ready for a new water heater?

Call (682) 474-0599 or schedule online to have the tank sized to your household, with the options and price explained before the old one comes out.

Call now Book Online